Sili-Out 2 removes silicate, phosphate, barium, arsenic, chromium as well as gels from the water quickly and reliably and permanently improves the water quality.
Sili-Out 2 allows targeted lowering of the above-mentioned pollutants, in a form safe for your animals, without affecting the pH value.
Sili-Out 2 improves the natural growth of corals and plants in pollutant problems within a very short time. The growth of unwanted diatom is sustained.
Sili-Out 2 is an aluminum-based product with a purity of 99 +%.
• Special instructions:
• This product is suitable for all ornamental fish, corals and lower animals.
• Do not use in animals which are used for the production of food.
• For eye contact, rinse under running water for several minutes.
• Do not swallow or inhale.
• Store in a dry place.
Silicate Remover
+ Removes silicate, phosphate, barium
+ Degree of purity 99 +%
+ Perfect water quality Sufficient for up to 2,000 liters
Instructions: Dosage: Use 50 ml on 100 liters of water.
Tips:
• Always start with the recommended dosage of Sili-Out 2 and increase it If necessary up to 100 ml per 100 liters of water.
• Before use, wash Sili-Out 2 thoroughly under water to remove abrasion.
• The ideal phosphate value in seawater aquariums should be between 0.02 - 0.05 mg and the silicate value at "not detectable".
• We recommend the use of Sili-Out 2 in a fluidized bed filter or filter support at a well-flowed point, For example, external or internal filters.
• Regularly use our Substrate Cleaner to remove phosphate deposits. During this application, Sili-Out 2 must be removed from the aquarium circuit until the water is clear again.
• Use Sili-Out 2 (aluminum-based) monthly alternating with Phos-Out 4 (iron hydroxide-based) to avoid unwanted enrichment of aluminum or iron.
Unfortunately there are no review yet. Be the first who rate this product.