RO-resin 600g

Special ion exchange resin - helps by reducing the growth of diatom.

Used to remove the last remaining pollutants from RO water, by using ion exchange resin as the final stage on a reverse osmosis unit. It reduces the growth of diatom, if silicate levels in tap water are too high.

Application:
Mixed bed demineralizer for the removal of silicate, nitrate and other ions from osmosis water. The resin is placed in designated cartridges (e.g. Aqua Medic demineralizing filters, Aqua Medic Platinum Line Plus) after the reverse osmosis units. Depending on the residual salt content and flow rate, the osmosis water is cleared of remaining ions. 

- Disposable resin.  If the conductivity of the desalted osmosis
  water begins to rise, the resin must be replaced.  
- Not rechargeable.  

Ingredients: 
- Styrene-divinylbenzene copolymer with trialkylammonium
  groups in OH form 
- Styrene-divinylbenzene copolymer with sulfonic acid groups in
  H-form
Hazard warnings:
H318 Causes serious eye damage.  

Safety instructions: 
P264 Wash thoroughly after use.
P280 Wear protective gloves and eye/face protection.  
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any existing contact lenses if possible. Continue rinsing.  
P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor.  
P501 Dispose of content/container in accordance with local/regional/national waste disposal regulations.